Treestand Personal Safety Line Kit - 7/16" Three Strand Rope
Kits include the following equipment:
1) 7/16" x 30' Nylon 3 Strand GI Rappelling Rope (Rated minimum 5,600 lb test. Color: Olive Drab)
1) 6mm x 4' Sterling Acc. Cord tied into a Prusik loop (Rated 3,600 lb test. Color: Black)
1) Sterling locking Carabiner (Rated minimum 5,000 lb test. Color: Black)
KIT I: above kit with a Figure 8 on a bight
KIT II: above kit with a 3" splice on one end
Directions: Your application may vary. Clinch the rappelling rope around the tree trunk, near or above your treestand position, by circling the trunk with the figure 8 on a bight end, OR the spliced end, and dropping the free end of the rope through the bight or splice eye back towards the ground, creating a girth hitch on the tree.
Tie the free end to something near the bottom of the climb/ladder, just to allow the rope to be secure and steady.
Attach the prusik to the 7/16" line, and clip the carabiner to yourself. As you climb, with a free hand, periodically move the prusik up the line with you.
We also offer Tree Stand Safety Kits in Nylon Doublebraid rope.
All products are made in the U.S.A.
Pre-spliced Rope Products are made to order and will ship within 7 business days.
Ordering Rope or Cord?
Unless a specific hank or spool length is specified in this product's title or description, rope and cord products on this site are priced by the foot. Enter the desired length of feet in the "Quantity" number of your order.
Your rope will ship as an uncut length in total feet unless otherwise specified. We offer UP TO THREE CUTS FREE OF CHARGE. Additional cuts are an upcharge (fee based on line diameter).
Please request any customizations in the "comment" section of your order.